Velleman IVSPROM1 - Manual (Page 16)

IVSPROM1
09.11.2010 ©Velleman nv 16
• STEP 3: Make sure all the information is correct and select “Save” on the top right corner to save your
setting and return to the address book page.
• STEP 4: To check whether your configurations are correct, select “>” to immediately access the DVR you
just added. You should be able to see the live view of the DVR.
Column Description
Required Column:
Title
Give a meaningful title to this IP setting.
IP Address / Port Enter the IP address and port number used to access this DVR remotely.
Username /
Password
Enter the user name and password used to access this DVR remotely. The default user
name and password are both “admin”.
Get Type Click this button to detect the device type based on the IP data entered in the
previous columns, allowing users to check whether the device they want to connect is
the right device, and allowing the system to enable the functions and settings the
device supports.
Optional Column:
Audio
Click “>” to select the audio channel you want, and slide to enable or disable the
audio function.
Note: Before using this function, check whether the camera connected to this DVR
supports audio transmission and the connection is correct. For details, please refer to
the DVR user manual.
Format Select the network transmission format.
Quality Click “>” to select the image quality from Best, High, Normal or Basic.
Push notification on
•
Push notification must be enabled both on the DVR and on the iPhone.
• STEP 1: enter the “ADVANCE CONFIG” menu on the DVR and select “NOTIFY”.
ADVANCE CONFIG
CANERA
DETECTION GUARD ON
ALERT CH1 LOBBY
NETWORK
DISPLAY
RECORD
REMOTE
DCCS
IVS
NOTIFY
EXIT
GUARD: Set to ON to activate the Push Notification function.
Note: For details about DVR operations from iPhone, please visit http://www.eagleeyescctv.com .
CH1: Enter the text you want to see when your iPhone receives Push Notification. The default text is the
channel number.