Velleman LX102 User Manual
Page 4
LX102
V. 01 – 06/06/2012
4
©Velleman nv
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1” (±2.5 cm) in
front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
•
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
•
Mechanical wear is not covered by warranty.
•
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
•
A qualified technician should install and service this device.
•
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
•
This device is designed for professional use on stage, in discos, theatres, etc. The LX102 can be
used indoors (<35°C, <75%RH) with an alternating current of max. 240V AC/50Hz.
•
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
•
Use the original packaging if the device is to be transported.
•
Keep this manual for future reference.
4.
Features
•
flat PAR light with warm and cool white LED
•
extremely slim and up-to-date design
•
smooth dimming curve
•
3 different dimming modes and perfect colour mixing
•
RGB control via max. 7 channels
o
2 channels: warm white, cold white
o
3 channels: warm and cold white, master dimmer
o
7 channels: warm and cold white, master dimmer, shutter, auto program, speed, dimmer
mode
•
built-in programs for stand-alone and sound-activated modes
•
double bracket, can be used as floor spot.
5.
Overview
Refer to the illustrations on page 2 of this manual.
1 LCD display
5
power output (PowerCon)
2 DMX output
6
fuse holder
3 DMX input
7
attachment point for safety cable
4 power input (PowerCon)
8
GND