Velleman LX102 - Manual (Page 8)

LX102
V. 01 – 06/06/2012 8 ©Velleman nv
channel function from to description
6 speed 000 255
speed of auto programs (slow ~ fast)
(when CH7 = 052 ~ 255)
7 dimmer
000 051 default dimmer speed
052 101 linear dimmer
102 152 non-linear dimmer 1
153 203 non-linear dimmer 2
204 255 non-linear dimmer 3
7.5 Master/Slave Mode
This mode allows control several units simultaneously.
1. Use standard DMX cables to daisy-chain your units together via the DMX connector on the rear of
each fixture. For longer cable runs we suggest using a terminator on the last fixture.
2. Choose the first unit in the chain to function as the master fixture. Press <MENU> and choose a
mode ( , or ).
3. On each of the connected slave units, set the same channel mode as the master (via ).
4. Set the DMX address of all slave units to 1 ( ).
8. Cleaning and maintenance
• All screws should be tight and free of corrosion.
• The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections…
• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
• Regularly remove dust from the housing and the air vents using a slightly damp cloth.
• There are no user-serviceable parts inside. Refer to an authorized dealer for service and/or spare
parts.
Fuse Replacement
1. Wedge the fuse holder [6] out of its housing with a flat-head screwdriver.
2. Remove the damaged fuse from its holder and replace with exact same type of fuse.
3. Insert the fuse holder back in its place and reconnect power.
9. Technical Specifications
power supply 240VAC ~ 50Hz (PowerCon® in/out)
power consumption 39W
light source 36 x high-power 1W LEDs (18 pcs warm white + 18 pcs cold white)
beam angle 17°
luminous flux 6050 lux @ 1m
dimensions 256 x 285 x 87mm
weight 2.8kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.luxibel.com.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.