Dexter Laundry SWD EXPRESS - Dryer (On-Premise) - Manual (Page 11)

11
OPERATING INSTRUCTIONS
1. Place the clothes load to be dried in the dryer drum and close the loading door.
2. Set the temperature selector to the desired setting for the type of clothes load to be dried.
3. Set the drying timer to the desired time.
4. Set the cool-down timer to the desired cooling time.
5. Depress the push-to-start button until the dryer continues to run when the button is released.
IMPORTANT: If the dryer operation is not interrupted, it will continue through the complete
cycle determined by the time set on timer. Opening the loading door will interrupt the circuits and
drive motor, and the main burners will cease to function. The signal light will remain on and the
time cycle will continue independent of the interruption until the expiration of the time remaining.
The dryer may be restarted by closing the door and repeating the starting procedure.
6. The drying time depends on the size and type of clothes, the amount of water left in the clothes
and the temperature/humidity of the room.
7. During the cool-down period, the dryer tumbles and the blower operates with the heat off to
cool the clothes.
IMPORTANT: Clothes should be removed from the dryer as soon as possible after the cycle is
completed and then folded or hung to prevent excessive wrinkling.