Asus RS700-E6/RS4 - Manual (Page 34)

Chapter 3: Installation options 3-2
Right outer rail
Left outer rail
Rear right
inner rail
Front right inner rail
Rear left inner rail
Front left
inner rail
1. Follow the directions in the figure to
attach the front inner rails to the two
sides of the server chassis.
2. Follow the directions in the figure to
attach the rear inner rails to the two
sides of the server chassis.
3. Secure the inner rails to the server
chassis with four (4) screws.
3.1 Rack rails assembly
If you have the rackmount rail kit, it contains two pairs of rails (one pair for each
side of the barebone system).
Follow the illustrations below for rackmount rail kit assembly.