Asus RS700-E6/RS4 - Manual (Page 77)

ASUS RS700-E6/RS4 5-29
View BMC System Event Log
BIOS SETUP UTILITY
Server
Total Number Of Entries: N/A
SEL Entry Number: [N/A]
Use +/- to traverse
the event log.
SEL Entry Number [N/A]
Allows you to view BMC system event log. Use the <+> and <-> keys to
traverse the event log.
Clear BMC System Event Log
Press the <ENTER> key to clear all BMC system event logs. Select [Ok] to confirm
the change.
BMC Watch Dog Timer Action [Disabled]
Allows the BMC to reset or poser down the system if the operating system crashes
or hangs.
Configuration options: [Disabled] [Reset Systen] [Power Down] [Power Cycle]
5.5.2 Remote Access Configuration
The items in this menu allows you to configure the Remote Access features. Select
an item then press <Enter> to display the configuration options.
BIOS SETUP UTILITY
Server
Configure Remote Access type and parameters
Remote Access [Enabled]
Serial port number [COM2]
Base Address, IRQ [2F8h, 3]
Serial Port Mode [57600 8,n,1]
Flow Control [Hardware]
Redirection After BIOS POST [Disabled]
Terminal Type [VT-UTF8]
Select Remote Access
type.
Remote Access [Enabled]
Enables or disables the remote access feature.
Configuration options: [Disabled] [Enabled]
The following items appear only when Remote Access is set to [Enabled].
Serial port number [COM2]
Selects the serial port for console redirection.
Configuration options: [COM1] [COM2]