Asus A8N-SLI Premium - Manual (Page 117)

4 - 4 2 4 - 4 2 4 - 4 2 4 - 4 2 4 - 4 2 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
4.6.4 4.6.4 4.6.4 4.6.4 4.6.4 CDROM Drives CDROM Drives CDROM Drives CDROM Drives CDROM Drives
1. 1st Slave: XXXXXXXXX 1. 1st Slave: XXXXXXXXX 1. 1st Slave: XXXXXXXXX 1. 1st Slave: XXXXXXXXX 1. 1st Slave: XXXXXXXXX
Allows you to assign optical drives attached to the system.
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Use <
↑
> or <
↓
> to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
CDROM Drives
1. 1st Slave: XXXXXXXXX
Phoenix-Award BIOS CMOS Setup Utility
Boot
4.6.5 4.6.5 4.6.5 4.6.5 4.6.5 Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
Boot Settings Configuration
Case Open Warning [ Enabled ]
Quick Boot [Enabled]
Boot Up Floppy Seek [Enabled]
Bootup Num-Lock [On]
Typematic Rate Setting [Disabled]
x Typematic Rate (Chars/Sec) 6
x Typematic Delay (Msec) 250
OS Select For DRAM > 64MB [Non-OS2]
Full Screen LOGO [Enabled]
Halt On [All Errors]
Phoenix-Award BIOS CMOS Setup Utility
Boot
Case Open Warning [Enabled] Case Open Warning [Enabled] Case Open Warning [Enabled] Case Open Warning [Enabled] Case Open Warning [Enabled]
Enables or disables the chassis open status feature. Setting to Enabled,
clears the chassis open status. Refer to section “2.7 Internal connectors”
for setting details. Configuration options: [Disabled] [Enabled]
Quick Boot [Enabled] Quick Boot [Enabled] Quick Boot [Enabled] Quick Boot [Enabled] Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When
Enabled, the system skips certain tests while booting.
Configuration options: [Disabled] [Enabled]