Asus SABERTOOTH 990FX/GEN3 R2.0 - Manual (Page 79)

ASUS SABERTOOTH 990FX/GEN3 R2.0 3-9
Chapter 3
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto]
Loads the optimal settings for the system.
[Manual] Allows you to individually set overclocking parameters.
[D.O.C.P.] Allows you to select a DRAM voltage.
The following item appears only when you set the Ai Overclocking Tuner to [Manual].
CPU Bus Frequency [Auto]
Allows you to set the CPU and VGA frequency. Use the <+> and <-> keys to adjust the
PCIE frequency. You can also key in the desired value using the numeric keypad. The
values range from 100 to 600.
PCIE Frequency [Auto]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the
PCIE frequency. You can also key in the desired value using the numeric keypad. The
values range from 100 to 600.
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-CPB CPU ratio. Use <+> and <-> keys to
adjust the value. The valid value ranges vary according to your CPU model.
AMD Turbo CORE technology [Auto]
Allows you to set the AMD Turbo CORE technology.
Configuration options: [Auto] [Disabled] [Enabled]
Memory Frequency [Auto]
Allows you to set the memory operating frequency.
Configuration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-
[Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3- [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-
1600MHz] [DDR3-1866MHz] [DDR3-2133MHz] [DDR3-2400MHz] [DDR3-1866MHz] [DDR3-2133MHz] [DDR3-2400MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
CPU/NB Frequency [Auto]
Allows you to set the ratio between NB clock and the CPU Bus frequency.
Configuration options: [Auto] [1400MHz] [1600MHz] [1800MHz] [2000MHz] [2200MHz]
[2400MHz] [2600MHz] [2800MHz] [3000MHz] [3200MHz]
HT Link Speed [Auto]
Allows you to set the HyperTransport link speed.
Configuration options: [Auto] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz]
[1800MHz] [2000MHz] [2200MHz] [2400MHz] [2600MHz] [2200MHz] [2400MHz] [2600MHz]