Asus SABERTOOTH 990FX/GEN3 R2.0 - Manual (Page 85)

ASUS SABERTOOTH 990FX/GEN3 R2.0 3-15
Chapter 3
CPU Power Thermal Control [130]
A higher temperature brings a wider CPU power thermal range and extends the overclocking
tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to adjust the value. The
values range from 130 to 151.
DO NOT remove the thermal module. The thermal conditions should be monitored.
DRAM Current Capability [100%]
A higher value brings a wider total power range, and extends the overclocking range
simultaneously. Configuration options: [100%] [110%] [120%] [130%]
DRAM Voltage Frequency [300KHZ]
Allows you to adjust the DRAM switching frequency. Assign a fixed high DRAM frequency to
increase the O.C. range, or a low DRAM frequency for a better system stability.
Configuration options: [300KHZ] [350KHZ] [400KHZ] [450KHZ] [500KHZ]
DRAM Power Phase Control [Optimized]
[Optimized] Allows you to set the ASUS optimized phase tuning profile.
[Extreme] Allows you to set the full phase mode.
CPU & NB Voltage [Offset Mode]
[Manual Mode] Allows you to set a fixed CPU voltage.
[Offset Mode]
Allows you to set the Offset voltage.
CPU Manual Voltage [Auto]
This item appears only when you set the CPU & NB Voltage item to [Manual Mode]
and allows you to set a fixed CPU voltage. The values range depends on your CPU.
CPU/NB Manual Voltage [Auto]
This item appears only when you set the CPU & NB Voltage item to [Manual Mode]
and allows you to set a fixed CPU/NB voltage. The values range depends on your
CPU.
Setting a high voltage may damage the CPU permanently, and setting a low voltage may
make the system unstable. Refer to the CPU documentation before setting the CPU
voltage.
Offset Mode Sign [+]
This item appears only when you set the CPU Voltage item to [Offset Mode].
[+]
To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Offset Voltage [Auto]
This item appears only when you set the CPU Voltage item to [Offset Mode] and allows
you to set the CPU offset voltage. Use the <+> and <-> keys to adjust the value. The
values range from 0.006250V to 0.700000V with a 0.006250V interval.