5 server mgmt menu, Server mgmt menu -40, Bmc detect timout [120 – Asus RS700-E7/RS4 User Manual

Page 104: Frb-2 timer timeout [6 minutes, Frb-2 timer policy [reset, O/s watchdog timer [disabled, O/s wtd timer timeout [10 minutes

Advertising
background image

5-40

Chapter 5: BIOS setup

5.5

Server Mgmt menu

The Server Mgmt menu displays the server mgmt status, and allows you to change

the settings.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Main Advanced

Server Mgmt

Event Logs Boot Monitor Security Tool Exit

BMC Firmware:

1.03

BMC Detect Timout

120

FRB-2 Timer timeout

[6 minutes]

FRB-2 Timer Policy

[Reset]

O/S Watchdog Timer

[Disabled]

O/S Wtd Timer Timeout

[10 minutes]

O/S Wtd Timer Policy

[Reset]

System Event Log

BMC network configuration

→←:

Select Screen

↑↓:

Select Item

Enter: Select Item

+/-: Change Opt.

F1: General Help

F2: Previous Values

F5: Optimized Defaults

F10: Save & Exit

ESC: Exit

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

BMC Detect Timout [120]

Allows you to set the number of seconds to wait for BMC. Use the <+> and <->

keys to adjust the value.

FRB-2 Timer timeout [6 minutes]

Enter value between 3 to 6 minutes for FRB Timer Expiratin value.

Configuration options: [3 minutes] [4 minutes] [5 minutes] [6 minutes]

FRB-2 Timer Policy [Reset]

Allows to configure how the system should respond if the FRB2 Timer exprise. Not

available if FRB2 Timer is disabled.

Configuration options: [Do Nothing] [Reset] [Power Down]

O/S Watchdog Timer [Disabled]

If enabled, starts a BIOS timer which can only be shut off by Intel Management

Software after the OS loads. Helps determine that the OS sucessfully loaded or

follows the O/S Boot Watchdog TImer Policy.

Configuration options: [Enabled] [Disabled]

O/S Wtd Timer Timeout [10 minutes]

Allows to configure the length of the O/S Boot Watchdog Timer. Not available if O/S

Boot Watchdog Timer is disabvled.

Configuration options: [5 minutes] [10 minutes] [15 minutes] [20 minutes]

Allows you to set the

number of seconds to wait

for BMC. Use the <+> and

<-> keys to adjust the

value.

Advertising