Asus RS700-E7/RS4 - Manual (Page 46)

Chapter 3: Installation options 3-2
3.1 Friction Rail Kit Installation Guide
Your friction rail kit package contains:
•
One pair of rack rails
• One pair of fixing latches
• 4 latch screws, 4 rail screws and 4 rail washers
3.1.1 Setting up the friction rail kit on the rack
Rack rails Fixing latches Front end Rear end
Latch screws
Rail screws
Rail Washers
1. Select a 1U space on the rack
where you want to install the rack
rail. A 1U space consists of three
square mounting holes with two
thin lips on the top and the bottom,
as shown in the right figure.
2. Adjust the rack rail to fit the depth
of the rack.
3. From inside the rack, place the rear rail
hook on the bottom thin lip of the rear
mounting hole, and then place the front
rail hook on the bottom thin lip of the
front mounting hole, as shown in the
right figure.