Asus MyPal A730 - Manual (Page 21)

Get started! 1-15
Activating MyPal
You need to properly calibrate and activate your device before using it.
This process ensures accurate positioning when entering text and
selecting menus.
To calibrate and activate your device:
1. Press the power button.
The Align screen appears when you turn on the
device for the first time, or after performing a hard
reset.
Power button
2. Use the stylus to tap the center of the
cross to perform the align screen
process. You may have to do this step a
few times to properly calibrate.
5. When prompted, select your time zone.
6. When the Today screen appears, you
are ready to use your device. Proceed to
the next section for information on the
basic screens on your device.
NOTE To perform a hard reset, press and hold
the power button while you press the tip
of the stylus on the reset switch.
NOTE To launch the Align Screen
function at any time, tap
,
tap Settings, then the System
tab. Tap the Screen icon, then
the Align Screen button.
4. Follow the screen instructions until setup
is complete.