Asus P5AD2 Premium - Manual (Page 88)

4 - 2 2 4 - 2 2 4 - 2 2 4 - 2 2 4 - 2 2 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
4.4.2 4.4.2 4.4.2 4.4.2 4.4.2 LAN Cable Status LAN Cable Status LAN Cable Status LAN Cable Status LAN Cable Status
This menu displays the status of the Local Area Network (LAN) cable
connected to the LAN (RJ-45) port.
The following item appears only when the A I O v e r c l o c k i n g A I O v e r c l o c k i n g A I O v e r c l o c k i n g A I O v e r c l o c k i n g A I O v e r c l o c k i n g item is set
to [AI NOS].
NOS Mode [Auto] NOS Mode [Auto] NOS Mode [Auto] NOS Mode [Auto] NOS Mode [Auto]
Allows you to set the NOS mode for various CPU loading. Selecting [Auto]
allows the NOS to automatically overclock the CPU speed based on the CPU
loading. Configuration options: [Auto] [Standard] [Sensitive] [Heavy Load]
The following item appears only when the N O S M o d e N O S M o d e N O S M o d e N O S M o d e N O S M o d e item is set to
[Standard], [Sensitive], or [Heavy].
Turbo NOS [Disabled] Turbo NOS [Disabled] Turbo NOS [Disabled] Turbo NOS [Disabled] Turbo NOS [Disabled]
Allows you to disable or set the overclock percentage for the selected NOS
Mode. Configuration options: [Overclock 3%] [Overclock 5%] [Overclock
7%] [Overclock 10%] [Overclock 15%] [Overclock 20%]
Twin Turbo NOS [Disabled] Twin Turbo NOS [Disabled] Twin Turbo NOS [Disabled] Twin Turbo NOS [Disabled] Twin Turbo NOS [Disabled]
Allows you to disable or set the overclock percentage for the selected
Turbo NOS. Configuration options: [Disabled] [Overclock 5%] [Overclock
7%] [Overclock 10%] [Overclock 15%] [Overclock 20%] [Overclock 30%]
POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled]
Allows you to enable or disable LAN cable check during POST. When
enabled, the menu reports the cable faults or shorts, and displays the point
(length) where the fault or short is detected.
Configuration options: [Disabled] [Enabled]
POST Check LAN Cable [Disabled]
LAN Cable Status
Pair Status Length
1-2 Normal N/A
3-6 Normal N/A
4-5 Normal N/A
7-8 Normal N/A
1-2 Normal N/A
3-6 Normal N/A
4-5 Normal N/A
7-8 Normal N/A
Check LAN cable
during POST.