Asus MAXIMUS VI HERO - Manual (Page 148)

4-12 Chapter 4: Software support
Chapter 4
RPM Mode
RPM Mode allows you to set the fan speed when the CPU temperature is below 75
o C.
Click and drag
to adjust the
fan’s speed
Click to switch between the
CPU and chassis fan screens
Click to go back
to the previous
screen
• When the CPU temperature reaches 75 o C, the fan will automatically run at full speed
to protect the CPU.
• For motherboard models without the CPU fan detection latch, only 4-pin CPU fans are
controllable in Fan Xpert 2.
• The Fan Xpert 2 may not be able to detect the fan speed if your fan is installed with an
external control kit for rotation speed.
• Fan Xpert 2 does not support 2-pin fans. If you install a 2-pin fan, it can only run at its
full speed.
• If the CPU or chassis fans have been changed, the Fan Auto Tuning process should
be repeated.
DO NOT remove your fan during the Fan Auto Tuning process.