Asus Z87I-PRO - Manual (Page 75)

ASUS Z87I-PRO 3-15
Chapter 3
tRDWR_dr [Auto]
Configuration options: [Auto] [1] – [31]
tRDWR_dd [Auto]
Configuration options: [Auto] [1] – [31]
MISC
MRC Fast Boot [Auto]
Allows you to enable, disable or automatically set the MRC fast boot.
Configuration options: [Auto] [Enable] [Disable]
DRAM CLK Period [Auto]
Configuration options: [Auto] [1] – [14]
Channel A/B DIMM Control [Enable Bot...]
Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Scrambler Setting [Optimized ...]
Allows you to set the optimized scrambler setting for stability.
Configuration options: [Optimized (ASUS] [Default (MRC)]
DIGI+ Power Control
CPU Load-Line Calibration [Auto]
Load-line is defined by Intel
® VRM specification and affects CPU power voltage. The
CPU working voltage will decrease proportionally to CPU loading. Higher load-line
calibration could get higher voltage and good overclocking performance, but increases
the CPU and VRM thermal conditions.
Select from Level 1 to Level 8 to adjust CPU power voltage from 0% to 100%.
The actual performance boost may vary depending on your CPU specification.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Voltage Frequency [Auto]
Frequency switching affects the VRM transient response and the thermal component
conditions. Higher frequency gets quicker transient response.
Configuration options: [Auto] [Manual]
DO NOT remove the thermal module when setting this item to [Manual Mode]. The thermal
conditions should be monitored.