Asus Z87I-PRO - Manual (Page 97)

ASUS Z87I-PRO 3-37
Chapter 3
ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]
Deep S4 [Disabled]
When enabled, the system in S4 state will further reduce power usage and will power off the
USB devices. The system in deep S4 state can be woken up via the power button, devices in
LAN or other ways except via the USB devices. Configuration options: [Disabled] [Enabled].
Configuration options: [Disabled] [Enabled]
Restore AC Power Loss [Power Off]
[Power On] The system goes into ON state after an AC power loss.
[Power Off] The system goes into OFF state after an AC power loss.
[Last State] The system goes into either OFF or ON state, whatever the system state
was before the AC power loss.
Power On By PCIE [Disabled]
[Disabled] Disables the PCIE devices to generate a wake-on-LAN feature of the
Intel ® /Realtek LAN device or other installed PCIE LAN devices.
[Enabled] Enables the PCIE devices to generate a wake-on-LAN feature of the Intel ® /
Realtek LAN device or other installed PCIE LAN devices..
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
3.6.8 APM