Asus P5LD-MR - Manual (Page 41)

ASUS P5LD-MR 2-21
4. Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
5. RAID controller selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 1-2 if you want
to use the LSI Logic Embedded SATA RAID Setup Utility (default);
otherwise, place the jumper caps to pins 2-3 to use the Intel ® Matrix
Storage Manager.
R
P5LD-MR
P5LD-MR Keyboard Power Setting
KBPWR1
(Default)
+5V +5VSB
2 3 1 2
R
P5LD-MR
RAID_SEL1
LSI RAID ROM
(Default)
INTEL RAID ROM
2 1 2 3
P5LD-MR RAID_SEL1 Setting