Asus P5LD-MR - Manual (Page 82)

4-22 Chapter 4: BIOS setup
CPU Internal Thermal Control [Auto]
Disables or sets the CPU internal thermal control.
Configuration options: [Auto] [Disabled]
The following item appears only when you installed an Intel ® Pentium ® 4
processor that supports Hyper Threading Technology.
Hyper Threading Technology [Enabled]
Allows you to enable or disable the processor Hyper Threading Technology.
Configuration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel ® Pentium ® 4
processor that supports Intel ® Speedstep technology.
Intel(R) SpeedStep Technology [Automatic]
Allows you to use the Enhanced Intel SpeedStep ® Technology. When set
to [Automatic], you can adjust the system power settings in the operating
system to use the EIST feature.
Set this item to [Disabled] if you do not want to use the EIST.
Configuration options: [Automatic] [Disabled]
4.4.5 Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Manual DRAM Frequency
Setting or Auto by SPD.
Advanced Chipset Settings
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Onboard Graphic Adapter Priority [PCI Express/Int-VG]
Onboard LAN Boot ROM [Disabled]
PEG Port Configuration
PEG Port [Enabled]
PEG Port VC1 Map [TC7]
PEG Force x1 [Disabled]
DRAM Frequency [Auto]
Allows you to manually set the DRAM frequency. Setting to [Auto] allows
the BIOS to automatically set the DRAM frequency by Serial Presence
Detect (SPD). Configuration options: [Auto] [533 MHz] [667 MHz]
• Refer to the Appendix for details on how to use the EIST feature.
• The motherboard comes with a BIOS file that supports EIST.