Asus RS704DA-E6/PS4 - Manual (Page 39)

2-19 ASUS RS700DA-E6/PS4, RS704DA-E6/PS4
2.7.4 Installing ASUS PIKE SAS RAID Card (optional)
Follow the steps below to install the optional ASUS PIKE SAS RAID card to the
ASUS PIKE riser card.
1. Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI Express x16 slot on the
motherboard.
2. Locate the two screws on the riser
card bracket, then remove the
screws from the bracket.
3. Locate the two screw holes on the
PIKE riser card.
4. For PIKE 1064E RAID card, secure
the riser card to the bracket with
two screws. For PIKE 1078, 2008
and 2008/IMR cards, secure only
one screw as shown in the right
figure.