Asus RS704DA-E6/PS4 - Manual (Page 47)

3-5 ASUS RS700DA-E6/PS4, RS704DA-E6/PS4
3.2 Installing optional ball-bearing rail kit
items
Your optional ball-bearing rail kit package contains:
•
two pair of server rails (for the server)
• two pairs of rack rails (for the rack)
• Nut-and-bolt type screws
3.2.1 Attaching the rails to the server
To attach the server rails:
1. Attach the front end of the server rail to the side of the chassis, matching
each of the three hooks to the holes on the rail. Then slide the rail toward the
front panel until it locks in place.
Rack rails Front end Rear end Nuts and screws
2. Secure the front end of the server
rail to the side of the chassis with
one screw.