Asus ESC2000 Personal SuperComputer - Manual (Page 103)

ASUS ESC2000 5-29
VCORE1/2 Voltage, +1.5V_P1/2DDR3 Voltage, +1.5V_ICH Voltage,
P1/2VTT Voltage, +1.1V_IOH Voltage, +12V Voltage, +5V Voltage,
+3.3V Voltage, +5VSB Voltage, +3VSB Voltage, VBAT Voltage
The onboard hardware monitor automatically detects the voltage output through the
onboard voltage regulators. Select [Ignored] if you do not want to detect this item.
5.4.9 I/O Virtualization
SR-IOV Supported [Disabled]
Enables or disables the SR-IOV support. Configuration options: [Disabled] [Enabled]
BIOS SETUP UTILITY
Main Advanced
Configure I/O Virtualization Parameters
SR-IOV Supported [Disabled]
Options
Disabled
Enabled
5.4.10 PCI Express Configuration
Active State Power-Management [Disabled]
Enables or disables the PCI Express L0s and L1 link power states.
Configuration options: [Disabled] [Enabled]
Auto allocate Payload size [Enabled]
Enables or disables auto allocate payload size improve PCIE data transfer
performance. Configuration options: [Disabled] [Enabled]
Auto allocate Payload size setting
BIOS SETUP UTILITY
Main Advanced
PCI Express Configuration
Active State Power-Management [Disabled]
Auto allocate Payload size [Enabled]
Auto allocate Payload size setting
Enable/Disable
PCI Express L0s and
L1 link power
states.
BIOS SETUP UTILITY
Main Advanced
Auto allocate Payload size setting
Multiple bus PCIE device [Enabled]
Multiple device PCIE device [Enabled]
Multiple function PCIE device [Enabled]
Multiple bus
PCIE device support
Multiple bus/device/function PCIE device [Enabled]
Enables or disables multiple bus/device/function PCIE device support. If some
PCIE cards act abnormally, set this item to [Disabled] to let payload size return to
the default value. Configuration options: [Disabled] [Enabled]