Using the objects command – Asus ESC2000 Personal SuperComputer User Manual
Page 128
6-14
Chapter 6: RAID configuration
Using the Objects command
To initialize the virtual drives using the
Objects command
1. From the
Management Menu, select Objects > Virtual Drive, and then
press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Change VD Parameters
Objects
Adapter
Virtual Drive
Physical Drive
LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008
BIOS Version A.08.09161344R
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
2. Select the virtual drive to initialize from the
Virtual Drives sub-menu, and
then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Select VD
Objects
Adapter
Virtual Drive
Physical Drive
Vitual Drive(1)
Virtual Drive 0
LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008
BIOS Version A.08.09161344R
Press ENTER To Select A VD, <Del> To Delete A VD