AUMA Electric multi-turn actuators SA 07.1 - 16.1_SAR 07.1 - 16.1 MATIC AM 01.1 - 02.1 - Manual (Page 62)

Note:
Please state type and commission no. of the device (see name plate) when ordering spare parts. Only original AUMA
spare parts should be used. Failure to use original spare parts voids the warranty and exempts AUMA from any liability.
Delivered spare parts may slightly vary from the representation.
Multi-turn actuators SA 07.1 – SA 30.1/ SAR 07.1 – SAR 30.1
with actuator controls AUMA MATIC AM 01.1 / AM 02.1
Operation instructions
62
No. Designation Type
001.0 Housing
002.0 Local controls Sub-assembly
002.5 Selector switch Sub-assembly
003.0 Local controls board Sub-assembly
003.1 Primary fuse
003.2 Fuse cover
004.0 Carrier for contactors
006.0 Power supply including mounting plate Sub-assembly
006.1 Mounting plate for power supply Sub-assembly
006.2 Power supply
006.2-1 Secondary fuse F3
006.2-2 Secondary fuse F4
008.0 Interface board Sub-assembly
008.1 Interface board
008.2 Cover plate for interface board
009.0 Logic board Sub-assembly
013.0 Adapter board Sub-assembly
500.0 Cover Sub-assembly
501.0 Socket carrier (complete with sockets) Sub-assembly
502.0 Pin carrier without pins Sub-assembly
503.0 Socket for controls Sub-assembly
504.0 Socket for motor Sub-assembly
505.0 Pin for controls Sub-assembly
506.0 Pin for motor Sub-assembly
507.0 Plug cover Sub-assembly
508.0 Motor power board Sub-assembly
509.0 Padlock
S1 Seal kit Set