I-View FSKY-100 3D/4D Joystick Keyboard - Manual (Page 10)

10
Function Description
14. ENTER
Press key ENTER, the Number input and setting area will be confirmed.
15. CLEAR
Press key CLEAR, the Number input area will reset
16. PRESET
Set up the Presets: Move the joystick, to adjust Pan/Tilt/Zoom of camera to select the
surveillance position. Input number and then press [PRESET] key. i.e. N + PRESET
Clear the presets: Input the preset number, and press [SHIFT] + [CLEAR] key.
i.e. Number + SHIFT + CLEAR key.
17. MUX-C: Revere
18. AUX1: Press key AUX1, turn on the fan and push AUX1 key again to turn off fan.
19. AUX2: Press key AUX2 to turn on the heater and push AUX2 key again to turn off heater.
20. AUX3: Press key AUX3, star to turn on the heater and fan at a time. Push AUX3 Key again
to turn off the heat and fan.
21. AUX4: Press key AUX4 to turn on/off the relay of Speed dome, such as wiper.
22. PGM
Input 2+4 key, and then press key PGM to select Baud Rate to 2400.
Input 4+8 key, and then press key PGM to select Baud Rate to 4800.
Input 9+6 key, and then press key PGM to select Baud Rate to 9600.
Input 1+9+2 key, and then press key PGM to select Baud Rate to19200.
Input 4+4,and then press key PGM to select Pelco D protocol.
Input 5+0,and then press key PGM to select Pelco P protocol.