I-View FSKY-100 3D/4D Joystick Keyboard - Manual (Page 9)

9
Function Description
8. SCAN. (360
°°°°pan auto scan or 3 D Scanner)
For FDPI-27X/35X/36X, FDPI-220, FDMO-27X/35X/36X, PTZWO-220 and SDCI-220
model:
Press key SCAN. The LED gets turned on, and 2 points auto scan begins.
Press key SCAN again. The LED gets turned off, and auto scan stop.
For SDCI-220, FTWO-100 and FTCI-100 model:
Press key 53 + CALL, star to Auto Scan function.
Move the Joystick to stop Auto Scan function.
9. SHIFT
Press key SHIFT, it gets turned on, and SHIFT is in effect. Press key SHIFT again, it gets
turned off, and SHIFT is off no effect.
10. PATTERN
Press key PATTERN, the LED will be light and star to Group tour function.
Click SHIFT + PATTERN + Number to enable the Group tour scan function. For example:
If you want to have the Group 4 tour scan; click SHIFT + PATTERN + 4
Press key PATTERN again, the LED will be off and stop to Group tour function.
11. BEFORE
Move the Speed dome move to previous preset location.
12. NEXT
Move the Speed dome move to next preset location.
13. CALL
Move to preset location: This is function for search or move the preset position of the speed
dome or receiver. Entry the Preset number and then press CALL key to move the speed to
this Preset location. i.e. Number + CALL the Speed dome will move this preset location. If
succeed, the number input area will reset automatically (i.e. CAM - 000).