I-View PTI-100 P.O.S. DVR - Manual (Page 11)

11
starts and specifies the time period of video recording once the sale stops
Clear text over screen when transaction ends: This would clear/clean up the text over the
screen after the specified time period when sale stops.
Setup the printer command code: The DVR is able to process certain functions after
receiving the printer command code, such as recording with the event of opening cash draw.
OK: Click this icon to complete setting.
Fig 2-1.3 Fig 2-1.4
2-2. Setup the configuration of EZNetPOS program
You must install the EZNetPOS.exe program on the POS system/server when you want to use
TCP/IP for the POS text transmission. Follow the instructions below to set your desired
parameter settings.
Step 1. Run the EZNetPOS.exe program and you should see the following image as Fig 2-2.1.