I-View PTI-100 P.O.S. DVR - Manual (Page 5)

5
1-2. Specification:
1-3. Pin assignment:
PTI-100 POS Text Inserter
z RS-485
Y: Transmitter (+) Z: Transmitter (-) A: Receiver (+) B: Receiver (-)
z USB Cable
Black: Ground Green: Data (+) White: Data (-) Red: DC5V (+)
z 8 Pin dipswitch
S1-- ↑OFF: Using serial port printer ↓ON: Using parallel port printer.
S2-- ↑OFF: Transmit POS transaction text via TCP/IP.
↓ON: Transmit POS transaction text via RS-485.
S3-S4: Baud rate setting, (Default is 9600BPS). Please refer to the Table 1.1:
1. Please ignore the baud rate setting if the POS uses the parallel port printer.
2. Please reboot the power of PTI-100 when you setup the Dipswitch. The PTI-100 needs to
share power from USB port of POS machine or plug DC 5V switching power adapter.
Item \ Model PTI-100 EX-400USB
Function POS text inserter Transaction text data
Communication RS-485 full duplex up to 1.2Km using twisted pair cable
Baud Rate 19200/ 9600/ 4800/ 2400 BPS
Interface Series, Parallel and RS-485 4 ports RS-485 interface
Dimension 135 x 110 x 35 mm 120 x 100 mm
Power DC 5V/250mA DC 5V/500mA
Temperature Operation: 0-70℃, Storage: -10-80℃ (Non- Condensing)