Lexibook DJ048 Series - Manual (Page 14)

14
ENGLISH
15
Please refer to image D.
1. Make sure the camera is off.
2. To open the battery door, slide it in the
direction of the arrow.
3. Insert 2 x LR03/AAA 1,5V type
(batteries not included) observing the
polarity indicated inside the battery
compartment.
4. Close the battery compartment.
Note: When the low battery icon
appears on the LCD screen, replace the batteries.
INSERTING NEW BATTERIES
Non-rechargeable batteries are not to be recharged. Rechargeable
batteries are to be removed from the product before being charged.
Rechargeable batteries are only to be charged under adult supervision.
Different types of batteries or new and used batteries are not to be
mixed. Only batteries of the same or equivalent type as recommended
are to be used. Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the product. The supply
terminals are not to be short circuited. Do not throw batteries into a fire.
Remove the batteries if you are not going to use the product for a long
period of time.
WARNING: Malfunction or loss of memory may be caused by strong
frequency interference or electrostatic discharge. Should any abnormal
function occur, remove the batteries and insert them again.
Important note: All files stored in the unit’s internal memory will be lost
when switching off the camera or replacing the batteries. Make sure you
transfer the files to your computer before turning off the product or changing
the batteries.