Lexibook DJ048 Series - Manual (Page 15)

14 15
ENGLISH
INSTALLING A MEMORY CARD
Please refer to image D.
You need to insert an SD card (8 GB maximum, not included) so you can
store your pictures.
1. Turn the camera off.
2. Push the SD card firmly into the SD
slot until you hear a ‘click’ sound.
Close the battery door.
3. Turn the camera on and
should appear on the LCD screen.
Note:
• To remove the card, push it in slightly
to release it from the slot.
• We recommend that you purchase a
good quality SD card.
INSTALLING THE CAMERA DRIVER AND THE SOFTWARE
Follow these instructions to install the camera driver and the “ArcSoft
MediaImpression” software on your computer system.
1. Insert the CD Software (included) in your CD-ROM drive. The CD will auto
run, and the main menu will appear.
2. Click “Install Driver”, and then follow the instructions to install the camera
driver.
3. You will need to reboot your computer after the driver installation.
4. Click ‘Install MediaImpression’, and the ‘Choose Setup Language’ screen
will appear. Select your language and click ‘OK’. Follow the instructions to
install ‘ArcSoft MediaImpression’ on your computer system. The software
offers many applications for photo editing and printing.
5. Once you have finished installing, please restart the computer.
Note:
• If the CD does not auto run, click ‘Start’, ‘Run’, then type in ‘D:\autorun.
exe’ in the Run dialog text box (where D:\ is your CD-ROM drive) and press
Enter.
• You must install the driver before downloading photos/videos from the
camera or using it as a webcam.
• Make sure the camera is not connected to your computer before installing
the driver and the software.