Lexibook ST400 - Manual (Page 10)

Copyright © Lexibook 2008
10
Once you complete the setup procedure, the Lexibook® Universal 4 in 1
remote control will allow you to control the various audio-video devices you have
DWKRPH:KHQ\RXXVHWKHUHPRWH¿UVWVHOHFWWKHW\SHRIGHYLFH\RXZLVKWR
use by pressing the corresponding device key (TV, DVD, SAT or VCR).
There are 3 programming methods: the Hot Brand code search, the Manual
set-up and the Quick/Automatic programming. Please refer to the code list p.11
and at the end of this manual.
Please always try the Hot Brand code search FIRST, then if no code in the list of
brands and models matches your device, try the Manual set-up, and only if this
one fails, try the Quick/Automatic programming.
Warning: program one appliance at a time. For example, start by setting your
remote to your TV, then to your DVD player…
Settings
There are 20 of the most popular TV brands and 10 brands for the DVD, VCR and
SAT listed in the Hot brand list. If the brand of the device you want to program on
the remote control is in the list, you should be able to make the settings quickly.
Please follow the instructions below:
1. Select the device you wish to set (ex.: TV). Search your device’s brand in
the code list attached p.11. There is a different code list for each of the 4 devices
which your remote control can be set to. Mark down the corresponding 1-digit
code or 2-digit code (for example, if your TV brand is PHILIPS, the correct code
is 00, if your VCR brand is SONY, the correct code is 2).
2. Switch on the device you want to control with the remote and aim the remote
at the device.
- If it’s a VCR, insert a video tape.
- For SAT, select a program.
- If it’s a DVD player, insert a DVD.
3. Press and hold the key of the device for 3 seconds. The LED located on
the top part of the remote will turn on and then turn off after 3 seconds.
4. Release the key. The LED lights up again.
5. Use the numeric keys to enter the 1-digit code (VCR, DVD or SAT) or
the 2-digit code (TV) applicable for your device.
$LPWKHUHPRWHFRQWURODWWKHGHYLFHWKH/('ÀDVKHVWRLQGLFDWHWKH
beginning of the code search.
7. When the device turns off, turns on, mutes or changes channels, the correct
code has been found. Press the device key once again to store the code and exit
the search mode.
7KH/('VORZO\ÀDVKHVIRXUWLPHVWKHQJRHVRII
Hot Brand code search
9. Try some keys on your remote control to check if they work properly. If they
do, your settings were successful: you found the right code. You are now ready
to set another device, with the same procedure.
Note:
,IWKHNH\VRQWKHUHPRWHFRQWUROGRQ¶WRSHUDWHFRUUHFWO\\RXGLGQ¶W¿QGWKH
correct code. Try the Hot brand search again or use another programming
method.
You can press the EXIT key at anytime to stop the search. The codes previously
stored won’t be lost or changed.
HOT BRAND LIST
English
ST400IM0148_new.indd 10 3/4/08 10:12:29