American Audio SDJ-2 - Manual (Page 13)

© American Audio ® - www.americanaudio.us - SDJ2™ Instruction Manual Page 13
gENErAL FUNCTIONS AND CONTrOLS (Cont.)
these jacks to send standard audio to a mixer or receiver. The red colored jack represents the right
channel output and white jack represents the left channels output. Output depends on the setting of
the MIXER OUTPUT MODE.
33. POWER CONNECTOR - Plug in the provided power adapter here. Only use the provided power
adapter.
34. CONTROL START A JACk- Connect the supplied mini-plug from the CUE jack on the rear of
your unit to the CONTROL out jack of a compatible American Audio
®
or American DJ
®
mixer. This will
enable the "Q-Start" function. This feature is only available on American Audio
®
or American DJ
®
“Q”
series mixers.
35. CONTROL START B JACk - Connect the supplied mini-plug from the CUE jack on the rear of
your unit to the CONTROL out jack of a compatible American Audio
®
or American DJ
®
mixer. This will
enable the "Q-Start" function. This feature is only available on American Audio
®
or American DJ
®
“Q”
series mixers.
36. AUDIO OUTPUTS PLAYER 2 - These jacks send a left and right analog mono output signal. Use
these jacks to send standard audio to a mixer or receiver. The red colored jack represents the right
channel output and white jack represents the left channels output.