American Audio SDJ-2 - Manual (Page 19)

© American Audio ® - www.americanaudio.us - SDJ2™ Instruction Manual Page 19
10. EXITING A LOOP - To exit a SEAMLESS
LOOP, press the out button (26). The in
button and out button (26) LEDs will
remain on, but will stop flashing. Music
playback will resume normal play. The but-
ton LEDs will remain on to remind you that
a loop is stored in memory.
Figure 16
11. REPLAY LOOP - The RELOOP function
allows you to return to your stored loop at any
time. The in button (26) and out button
(26) LEDs will indicate a loop is stored in mem-
ory, and may be played at any time. To replay
the loop, press the reloop button (26). The
in button (26) and out button (26) LEDs
will again begin to flash indicating SEAMLESS
LOOP mode has been activated and your stored
loop will immediately begin to play.
Stutter Effect: You can use your loop to create
a stutter effect. When a loop is playing press
the in button (26) repeatedly to create this
effect.
Figure 17
Press the in button (26). This will set
the starting point of the SEAMLESS
LOOP. The in button (26) LED will
blink.
Figure 14
bASIC OPErATIONS (CONT.)
2)
Press the out button (26) to set the
ending point for your SEAMLESS LOOP
(Figure 15). The in button (26) and out
button (26) LEDs will immediately begin
to flash rapidly indicating the SEAMLESS
LOOP mode has been activated.
Figure 15
3)