Specifications – Lectrosonics HH User Manual

Page 14

Advertising
background image

HH

LECTROSONICS, INC.

14

Specifications

The FCC requires that the following statements be included in this manual:

For body worn operation, this HM Transmitter has been tested and meets the FCC

RF exposure guidelines when used with the Lectrosonics accessories supplied or

designated for this product. Use of other accessories may not ensure compliance with

FCC RF exposure guidelines. Contact Lectrosonics if you have any questions or need

more information about RF exposure using this product..

This device complies with FCC radiation exposure limits as set forth for an uncontrolled

environment. This device should be installed and operated so that its antenna(s) are not
co-located or operating in conjunction with any other antenna or transmitter.

Operating frequencies:
Block 470 470.100 - 495.600

Block 19

486.400 - 511.900

Block 20

512.000 - 537.500

Block 21

537.600 - 563.100

Block 22

563.200 - 588.700

Block 23

588.800 - 614.300

Block 24

614.400 - 639.900

Block 25

640.000 - 665.500

Block 26

665.600 - 691.100

Frequency selection:

(Normal Tuning mode);

256 frequencies in 100 kHz steps

(Fine Tuning mode)

1024 frequencies in 25 kHz steps

(except block 23 - contact Lectrosonics for details)

Channel Step Size:

Normal Tuning mode:

100 kHz

Fine Tuning mode:

25 kHz

RF Power output:

Selectable at 50 or 100 mW

Pilot tone:

25 to 32 kHz frequency - 5 kHz deviation

(Hybrid, IFB, 200 Series, Mode 6)

Frequency stability:

± 0.002%

Deviation:

± 75 kHz max.

Spurious radiation:

90 dB below carrier

Operating temperature range:

-30° C to +60° C

Input compressor:

Dual envelope compressor, >30 dB range

Audio Gain range:

0 to 45 dB; menu selectable

Modulation indicators:

Dual bicolor LEDs indicate modulation

of -20, -10, 0 and +10 dB referenced to full

modulation, LCD bar-graph indicator

Frequency response

40 Hz to 20 kHz (+/- 1dB)

Low frequency roll-off:

-3 dB selectable @35, 50, 70, 100, 125 Hz,

36 dB/octave (varies slightly w/ selection)

Controls:

External:

Programmable mute/talkback button

Internal control panel:

Power, Side Button Setup, MENU/SEL, BACK

and Up/Down arrow buttons for menu item

selection and settings.

Battery:

(2) AA with polarity protection and

battery ejection lever

Battery Life:

5.5 hours (alkaline); 8-10 hours (lithium)

Battery Status Indication:

Transmitted to Lectrosonics Digital Hybrid and

200 Series receivers

Capsule Interface:

1.25 in. x 28 thread pitch

Power available: 5V, 25 mA max

Input impedance: 1000 Ohms

Weight:

11.4 oz. with lithium batteries and HHC

capsule

Dimensions:

9.5” long x 1.97” diameter at largest point with

HHC capsule attached

Emission Designator:

180KF3E

† Not all frequency blocks are available in all countries. Consult your local

representative or contact Lectrosonics for more information.

Specifications subject to change without notice.

Advertising
This manual is related to the following products: