Lectrosonics HH - Manual (Page 5)

Hand Held Transmitter
Rio Rancho, NM 5
A mic capsule is
threaded onto the body
of the transmitter in the
direction shown.
Do not overtighten it.
The lower housing opens by rotating
it in the direction shown. After the
threads are disengaged, pull the
housing downward until it engages
the detent that holds it open.
The threaded interface is a 1.25”
opening with 28 threads per inch
and three contact rings
Mic Capsules:
Lectrosonics offers two types of capsules. The HHC is
the standard capsule and the HHVMC is the Variable
Mic Capsule which includes adjustments for Bass,
Midrange and Treble.
HHC Lectrosonics
cardioid electret
HHVMC Lectrosonics cardioid
electret with VariMic preamp
Along with these two models from Lectrosonics, a
variety of different capsules with Shure ®* & EV ®* type
threads and electrical interface will work from different
manufacturers. This gives you the flexibility to choose
your capsule to use with the HH wireless transmitter.
A list of compatible capsules is on the website at:
http://www.lectrosonics.com/images/PDFs/hh_
compatible_microphone_capsules.pdf
Capsule Installation
Capsules are attached with a right-hand thread.
To remove the windscreen from the mic capsule,
line up the blue wrench (included with the capsule
head) with the flat notches on the lower threaded area
of the mic capsule.
Do not touch the contacts between the mic capsule
and transmitter body. When necessary, the contacts
can be cleaned with a cotton swab and alcohol.
*All product names are trademarks of their respective
owners, which are in no way affiliated with Lectrosonics.
Mechanical Design