Lectrosonics VP85 - Manual (Page 6)

6
VP85 and VP85E
VP85 SPECIFICATIONS
MICROPHONE:
Professional quality, cardioid electret microphone, for use with either 17" flexible gooseneck or 16' cord.
AMPLIFIERS:
Distributed Power: Three separate power amplifiers
Power Output: 21 watts total; 7 watts per amplifier (RMS)
Distortion: Less than 1% over full voice frequency range
SPEAKER SYSTEM:
High efficiency, full range 8" cone speaker mounted in sealed enclosure. Special 2 Ohm voice coil with a 2 pound
magnet assembly.
POWER SOURCE:
Rechargeable 12 volt, 8 amp hour self-contained battery pack provides 12 hours of operation at normal sound levels
with lamp operation, or up to 40 hours without lamp. UL and CSA approved CH-40 charger recharges batteries in 24
hours from full discharge or provides continuous operation from any 110/120V AC outlet.
LAMP:
Long-life incandescent lamp with focused reflector.
CONTROLS:
1) Three position power OFF-ON-LAMP switch with red LED power-on indicator
2) Main microphone volume control
3) Auxiliary microphone/hi-level input volume control
4) Bass tone control
5) Treble tone control
MIXER INPUTS:
1) Two shock mounted main microphone inputs-1/4" phone jacks
2) Auxiliary microphone input - 1/4" phone jack
3) Hi-level input - RCA phono jack
SYSTEM OUTPUTS:
1) Hi-level output - RCA phono jack
2) Two 1/4" external speaker jacks - for 2 ohm speakers
DIMENSIONS: 19 3/8" deep X 19 1/4" wide X 15 1/4" high
WEIGHT: 43 lbs (with two ES85 extension speakers)
CONSTRUCTION:
Walnut grain vinyl finished cabinet with mitre-folded and braced construction. Sides are carpeted 5/8" void-free
plywood and edges are protected with bumper guard moldings. The optional S-85 folding floor stand is fully carpeted
to match the lectern.