Fairbanks LabelBank Barcode Application For the FB3000 Series Operators Manuals - Manual (Page 22)

Section 3: Operations
06/08 22 51170 Rev. 1
Defining the Function Keys
There are two levels of Function Key options .
• The two levels are distinguished by
the color of the captions above
them, either
green or yellow .
• Switch between the two levels by
pressing the
Right Arrow key.
KEY Name DESCRIPTION
F1 Log-on /
Log-off
• Once logged on, user name appears at the top of the Weigh
Screen.
• User stays logged on, he or she logs off, or another user logs on.
F2 Label /
No Label • When the caption reads
Label , printing a label is allowed.
• When the caption reads No Label , Process data is still collected, but
no label is generated.
F3 Box / Pallet Box / Pallet button determines which type of label is printed next.
− If Pallet is selected, the caption reverts to Box after the pallet label
prints.
F4 Tare /
No Tare Sets up a Tare Weight for use on other amounts than what was
programmed by the DataBank operator
− Inputting a Manual Tare Value for a product stays in effect until
this or a new product is processed, and does not change the
stored tare for that product.
F5 Lot Displays the Lot ID entry dialog box, allowing input of a new Lot ID.
F6 Full ID /
Hot Key Toggles between using the Full ID Number or the Hot Keys
• Hot Keys are 1- or 2-digits assigned to each product for quick access.
• Hot Keys are used with pre-keyed items, or when a very small number
of products are scanned ( up to 99 ).
• LabelBank Hot Keys are used like telephone hot keys.
Pressing the Right
Arrow button activates
the Green F-Keys.