Fairbanks LabelBank Barcode Application For the FB3000 Series Operators Manuals - Manual (Page 9)

Section 1: General Information
06/08 9 51170 Rev. 1
FILE SHARING PROCESS STEPS
1. The operator inputs data using the LabelBank Application, which writes that into
a file in the “Data” folder.
2. Once it is completely finished, the LabelBank Application writes an empty file
with the same name in the “Ready” folder.
3. The DataBank Application sees the data file written in the “Ready” folder.
4. The DataBank Application gets the data from the “Data” folder.
5. The data is processed, and then stored on the instrument’s hard drive in the
following location:
9 C:\DataBank\DATABANK.GDB
6. The DataBank Application deletes the files from the “Ready” and the “Data”
folders.
NOTE: All numbers on the images correlate with the steps above.