IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 76)

11-4. Copy and movement of position data
The following operating instructions are to copy or move the position data to another position No.:
Select the F1 (Edit) key on the Mode Selection
screen.
Select the F1 (Posi) key.
Select the F3 (Copy) key.
Positions from which data is copied or moved
Last No. First No.
Enter the first No. of the positions from which data is
copied or moved with the ten-key numeric pad and
press the return key.
Enter the first No. of the positions to which data is
copied or moved with the ten-key numeric pad and
press the return key.
When copying the data, press the F1 (Copy) key.
When moving the data, press the F2 (Move) key.
Positions to which data is copied or moved
First No.
73