8 notification setting – LevelOne FCS-8006 User Manual
Page 107
Intelligent Surveillance Solution
LevelOne IP CamSecure
-
106 -
Step 1:
Select the Monitor connected to the system.
Step 2:
Auto scan group: Select appointed server group to activate auto scan settings.
Step 3:
Primary channel: Select appointed channel that will always be on the screen when auto scan is
activated.
Step 4:
Secondary channel: Select appointed channel with secondary priority behind primary channel when
auto scan is activated.
Step 5:
Layout: Select the screen division of “NxN type” in Remote live viewer panel.
9.1.8 Notification Setting
Status display:
Show recording status:
Select it to show the crystal ball with recording status on monitor display.
Show camera event:
Select it to show the smart guard detected event appointed in Main Console on
each channel.
Note:
To execute this function, need setup on screen display as an action of Smart Guard instant
response.
Show counting result:
Select it to show the counting result appointed in Main Console on each channel.
* Note: This function is not available under Lite license.
Step 1
Step 2
Step 3
Step 4
Step 5