LiftMaster TAC2D TAC Retrofit System for *1812 - Manual (Page 6)

6
TELEPHONE PROGRAMMING
PROGRAMMING NUMBER DESCRIPTION OF TASK FACTORY SETTING PROGRAMMING PROCEDURE
**01 Enable Call Forwarding Disabled **01
**02 Disable Call Forwarding **02
**03 Enable Intercom Mode Disabled **03
**06 Verify Call Forwarding Number (Via Caller ID) Disabled **06
**07 Enable Telco Mode Disabled **07
**#8 Erase Call Forwarding Number **#8
**10 Adjust Ring Count **10 + Ring Count (2-5)
**13 Enable Alternate DTMF Programming Disabled **13
**14 Enable Standard (Long) Ring Tone **14
**15 Enable Alternate (Dual) Ring Tone Enabled **15
#*16 Disable Alternate DTMF Programming **16
*# Call Forwarding Number # Enter Call Forwarding Telephone Number
*# + Telephone Number
(Up to 14 digits) + #
PROGRAMMING
» QUICK REFERENCE
MASTER CODE NUMBER
Write down the Master Code and store in secure location.