LT Security LTD5304 - Manual (Page 26)

Digital Video Recorder User Manual
24
Ticking off "DETECTION" means to enable motion detection, not ticking off means not to enable motion detection.
4. SENSITIVITY
It is the sensitivity of the motion detection.
The range is from ‘1’ to ‘8’. The bigger of the value, the more sensitive it is.
5. TO REC
If selecting "TO REC", DVR will record when motion event is detected. If not, DVR will not record.
6. ALARM OUT
There are two options: ALARMOUT1 and BUZZER.
•
When ALARMOUT1 is selected and the sensor is triggered, DVR will give normal alarm.
•
When BUZZER is selected and the sensor is triggered, DVR will give buzzer alarm.
When the alarm output is unselected, DVR will not send alarm.
7. SCHEDULE
It is the schedule of the motion detection. The default schedule is everyday. Press "SETUP” button to set motion
detection schedule.
8. AREA
STEP1 move the cursor to “setup”.
STEP2 Press "SETUP" button to enter the Area Setup submenu.
It displays the selected detection area (refer to Fig. 3.11). There are four options:
−
ALL: All area will be detected such as the following picture.
−
CUSTOM: Part of selected area will be detected.
−
NULL: No area to detect
−
BACK: Go back to Motion Alarm Configuration menu.