LT Security LTD5304 - Manual (Page 31)

Digital Video Recorder User Manual
29
Set PTZ address. Press "Enter" key and use the number key, "+" and "-" buttons to set.
5. PRESET
STEP1 Press "SET" button to enter Preset submenu shown as Fig. 3.15. There are 16 presetting points that can be
set in every channel.
STEP2
In Preset submenu, press "Enter" button to switch the presetting point needing to be reset.
STEP3 Press "ADJUST" button to enter the PTZ mode.
STEP4 On the front panel, press "ZOOM", "FOCUS", "SPEED", "IRIS", "+" (MENU) and "-" (PTZ) buttons to modify
position of the presetting point.
STEP5
Press "UP", "DOWN", "RIGHT" and "LEFT" buttons to rotate the Speed Dome.
STEP6 Press "ESC" button to come back Preset menu.
STEP7 Press "SAVE" button to save the setting, and press "CANCEL" to discard the setting.
Notice: how to use the presetting point:
Users can use the number key to switch the presetting point in PTZ mode. Firstly, press "PTZ" button to enter PTZ mode, then press
the number key such as "1", and the Speed Dome will move to presetting point 1.
6. COPY TO
Users can copy the settings of this channel to all or any other selected channel.
3.2.6 User Configuration
User Configuration is shown as Fig 3.16. The default username is Admin. Administrator can add users, set users’
authorization and delete users.