LumaSense Technologies InfraWin 5 - Manual (Page 12)

InfraWin 5 Manual Getting Started 12
2.4.2 Saving Measurement Values to a New File
To save measurement values to a new file:
1. Click the Exit with saving button located at the top of the Measurement window
OR,
If you have the Remind to Save feature activated, you can select Yes in the dialog box
that appears when you attempt to close the Measurement window.
A standard Windows™ dialog box will appear allowing you to save your file to your default
InfraWin collections folder or to create a new folder in a directory of your choice.
Figure 4: File Save Box
If you want to save your file to a different location, select the new location before
proceeding to the next step.
2. Create a File Name for your file.
3. Click the Save button to save your file.
Note: If you have already closed out of the Measurement window, but want to save
your last measurements to a separate file, you can do so by using the Save As command
found in the Quick Access bar located at the left of your screen. You can also choose
File > Save As from the Menu Bar located at the top of the screen.
However, it is important to note that you will have to perform this function before you
reopen the Measurement window.
Refer to Chapter 4 for more information on working with Measurements.