LumaSense Technologies InfraWin 5 - Manual (Page 23)

InfraWin 5 Manual Measurement 23
4.2 Listing (analyzing)
For analyzing the
measured values in this
field, all measured data appear in a numeric
list.
The date beside the time gives more exact
values to see what happened on time units
smaller than 1 s. The value specifies the time
in seconds after midnight (0:00 h). The
amount of data depends on the frequency
that readings were taken (settings at PC
sampling rates). As the amount of data
increases, so does the amount of storage
space required to save it. In order to save
room, all .i12 data files are stored by a binary
code.
4.3 Output .TXT file (analyzing)
The same file as found under Output listing may be converted into a text file and
can be easily opened, for example with Excel. With the standard import settings,
Excel automatically formats the columns accordingly (tabulator as separators).
4.4 Trend output (analyzing)
The graph’s curve depicts the
temperature change over
time within the specified temperature range.
Additionally, other information appears in this
window; such as recorded time (x-axis) and
temperature in degrees (y-axis) as well as the
time and temperature at the vertical cursor line,
which can be dragged with the mouse.
Selecting the Trend output initially causes all
the saved data to be displayed.
If the data exceeds an amount that can
reasonably be represented, you may Zoom in on a partial segment using the mouse. Under Total you
can return to the representation of the entire curve.
Scaling determines the type of graphics scaling for
Trend output. When you start the Trend output, scaling
is automatically set up as Same for all Signals. You
can adjust this setting to Individually for each device
to adjust scaling for each connected device.
Scaling for measurements with measured internal
Temperature will automatically be viewed (0 to 100 °C or 32 to 212 °F), and for measured intensity
of signal (0 to 150%). Scaling will also
automatically be selected individually for each
device and the scaling option will be disabled.
Scaling for measurements created by PI6000
will automatically be viewed Individiually for
each device. The scaling option will also be
disabled.