LumaSense Technologies INNOVA 1309 User Manual
Page 15
Advertising
Chapter 2
________________________________________________________________________
________________________________________________________________________
BE1285-15
1309 Multipoint Sampler
LumaSense Technologies A/S
Page 15 of 42
Fig. 2.5. Dipswitch settings binary “0”
If the switch is up, it represents a binary “1”. See Fig. 2.6.
Fig. 2.6 Dipswitch settings binary “1”
The default interface address of the 1309 is set to 01111 (decimal val-
ue 15), see Fig. 2.7. If this is not suitable for your system, use the
switches to set an address appropriate to your system.
Advertising