Base setup, Network base, Base in csd mode – Spectra Precision SP80 User Manual
Page 35: Base with radio, Network base base in csd mode base with radio
Engl
ish
29
Base Setup
Network Base
A network base broadcasts its RTK corrections via the
Internet. This can be done in one of two ways:
• Using the built-in cell modem, which can be used after
having inserted the SIM card purchased for this purpose.
NOTE: Turn the SIM Card upside down (label facing
upward) before inserting it. Once the card has been
inserted, close the rubber flap.
WARNING
- PLEASE, MAKE SURE YOU INSERT THE
SIM CARD INTO THE SIM CARD HOLDER AND NOT
ELSEWHERE.
Then you need to select this modem when configuring
your base receiver for RTK operation (done from the field
software).
• Using the built-in WiFi device. You simply need to select
this device when configuring your base receiver for RTK
operation (this is done from the field software).
Base in CSD Mode
Same as above using the built-in modem. The SIM card used
in that case is set to allow the base to be called by the rover
through a phone number.
Double-check with your ISP provider that CSD (or GSM data)
is available and activated in your subscription.
Base With Radio