DeFelsko PosiTector PC v.1.1 - Manual (Page 17)

16
Returning for Service
Before returning the instrument for service…
1. Install new alkaline batteries in the proper alignment shown within
battery compartments.
2. Examine the probe screen for dirt or damage.
3. Perform a Reset (pg. 13) and a Zero (pg. 6)
If you must return the instrument for service, describe the problem fully
and include measurement results, if any. Be sure to also include the
base unit, probe, your company name, company contact, telephone
number and fax number or email address. Return to your point of
purchase.
Website: www.defelsko.com/support
Technical Data
Conforms to ASTM D7378
Base unit dimensions: 146 x 64 x 31 mm (5.75" x 2.5" x 1.2")
Probe dimensions: 222 x 50mm diameter (8.75" x 2" diameter)
Alkaline Batteries: Base unit 3 "AAA" batteries. Probe 3 "AA" batteries
Temperature Range: 0 to 40°C (+32° to +104°F)
Measuring Range: 20 - 110 microns (0.8 - 4.3 mils)
Measuring Resolution: 1 micron (0.05 mil)
Measuring Distance: approximately 18 mm (3/4 inch)
Measurement Area: 2 mm (0.08 inch)
Measuring Time: approximately 2 to 5 seconds
Accuracy: ±5 microns (± 0.2 mils)
The probe uses ultrasound frequencies above 100KHz with sound
pressure levels well below 110 dB (relative to 20uPa).
Available Options
A variety of accessories are available to help you get the most from
your PosiTector PC Powder Checker.