In-Situ TROLL 9500 Operators Manual - Manual (Page 9)

2
0095110 rev. 007 01/09 TROLL 9500 Operator’s Manual
CONVENTIONS
Throughout this operator’s manual you will see the following symbols.
The check mark highlights a tip about a convenient feature
of the MP TROLL 9500
The exclamation point calls your attention to a requirement
or important action that should not be overlooked
Typical usage questions and answers that we hope will help you gain
a better understanding of your new Multi-Parameter TROLL 9500
and simplify its setup and operation
UNPACKING AND INSPECTION
Your MP TROLL 9500 was carefully inspected before shipping. Check
the instrument for any physical damage sustained during shipment.
Notify In-Situ and file a claim with the carrier if there is any such dam-
age; do not attempt to operate the instrument.
Please save packing materials for future storage and shipping of your
MP TROLL 9500. The shipping boxes have been performance-tested
and provide protection for the instrument and its accessories.
Accessories may be shipped separately and should also be inspected
for physical damage and the fulfillment of your order.
SERIAL NUMBER
The serial number is located on the large label on the Multi-Param-
eter TROLL 9500 body, and also on a small label inside the battery
compartment. The serial number is programmed into the instrument
and displayed when the instrument is connected to a PC running Win-
Situ 4 or Pocket-Situ 4. We recommend that owners keep a separate
record of this number. Should your Multi-Parameter TROLL 9500 be
lost or stolen, the serial number is often necessary for tracing and
recovery, as well as any insurance claims. If necessary, In-Situ main-
tains complete records of original owner’s names and serial numbers.
Serial numbers of the water-quality sensors are stored in sensor
memory and displayed in the software when sensors are installed.
TO OUR CUSTOMERS . . .
Thank you for your purchase of an In-Situ product. We are glad
you chose us and our products to help you with your environmental
monitoring needs. In-Situ Inc. has been designing and manufactur-
ing world-class environmental monitoring instrumentation for over 25
years in the Rocky Mountains of the United States. As it was in the
beginning, our expectation is that this product will provide you with
many trouble-free years of use. To that end, we pride ourselves on
delivering the best customer service and support possible—24 hours
a day, 7 days a week. We believe that this level of commitment to
you, our customer, is imperative in helping you ensure clean, safe
groundwater and surface water resources across the globe. We
also understand the need for accurate, reliable assessments and we
continue to make significant investments in Research and Develop-
ment to ensure that we deliver the latest product and technological
innovations to support your needs.
Whether you are gathering information about your body of water for
a few moments, or over a period of years, you can rely upon us to
provide you with a quality product and outstanding customer support
at a fair price and have that product delivered to you when and where
you need it.
We want your experience with In-Situ Inc. to be pleasant and profes-
sional, whether you are renting from us, or purchasing from us. We
would be pleased to hear from you and learn more about your needs,
and your experiences with our products. Again, we thank you for
choosing In-Situ Inc. and we look forward to serving your needs now,
and in the future.
Bob Blythe, President and CEO
In-Situ Inc.
[email protected]
SECTION 1: INTRODUCTION