Asus P7P55D-E LX - Manual (Page 53)

ASUS P7P55D-E LX 2-11
2.4.2 Ai Overclock Tuner [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal frequency.
Select either one of the preset overclocking configuration options:
Manual Allows you to individually set overclocking parameters.
Auto Loads the optimal settings for the system.
D.O.C.P Overclocks DRAM frequency by adjusting BCLK frequency.
X.M.P. If you install memory module(s) supporting the eXtreme
Memory Profile (X.M.P.) Technology, choose this item to set the
profile(s) supported by your memory module(s) for optimizing
the system performance.
CPU Level UP Loads settings for using CPU Level UP.
The configuration options for the following sub-item vary depending on the DIMMs you
install on the motherboard.
DRAM O.C. Profile [DDR3-1800MHz]
This item appears only when you set the
Ai Overclock Tuner item to [D.O.C.P.] and
allows you to select a DRAM O.C. profile, which applies different settings to DRAM
frequency, DRAM timing and DRAM voltage.
Configuration options: [DDR3-1800MHz] [DDR3-1866MHz] [DDR3-2000MHz] [DDR3-
2133MHz] [DDR3-2200MHz]
DRAM Frequency
(MHz)
CPU Frequency (GHz)
2.66
2.8 2.93
1333 Auto Auto Auto
1600 D.O.C.P. Auto Auto
Above 1600 D.O.C.P. D.O.C.P. D.O.C.P.
• When using DIMMs with a frequncy higher than the Intel ® CPU spec, use this ASUS
exclusive DRAM O.C. Profile function to overclock the DRAM.
• Adjust BCLK frequency to obtain a better performance after applying the D.O.C.P
function.
eXtreme Memory Profile [High Performance]
This item appears only when you set the
Ai Overclock Tuner item to [X.M.P.] and
allows you to select the X.M.P. mode supported by your memory module.
Configuration options: [High Performance] [High Frequency]
To obtain the best performance of the X.M.P. DIMM or 1600MHz DIMM, install only one
DIMM on each memory channel.