2 uncore configuration, 3 onboard devices configuration, Uncore configuration -18 – Asus P7P55D-E LX User Manual

Page 60: Onboard devices configuration -18

Advertising
background image

2-18

Chapter 2: BIOS information

2.5.2

Uncore Configuration

The Uncore Configuration menu allows you to change the advanced chipset settings.

Memory Remap Feature [Enabled]

[Disabled]

Do not allow remapping of memory.

[Enabled]

Allows for the segment of system memory that was previously overwritten by PCI
devices to be remapped above the total physical memory.

Fast MRC [Disabled]

[Enabled]

While cold booting, MRC directly restores memory data from valid NVRAM without
hardware training.

[Disabled]

The cold booting with memory detection and hardware training.

2.5.3

Onboard Devices Configuration

HDA Controller [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

Front Panel Type [HD Audio]

[AC97]

Set the front panel audio connector (AAFP) mode to legacy AC’97

[HD Audio] Set the front panel audio connector (AAFP) mode to high-definition audio.

Realtek LAN [Enabled]

[Enabled]

Enables Realtek LAN Controller.

[Disabled]

Disables Realtek LAN Controller.

LAN Boot ROM [Disabled]

This item appears only when you enable the previous item.
[Disabled]

Disables Realtek LAN Boot ROM.

[Enabled]

Enables Realtek LAN Boot ROM.

J-Micron eSATA/PATA Controller [IDE Mode]

[Disabled]

Disables the J-Micron controller.

[IDE Mode]

Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Marvell 9123 Controller [IDE Mode]

[Disabled]

Disables the Marvell controller.

[IDE Mode]

Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[AHCI Mode]

Set to [AHCI] when you want the SATA hard disk drives to use the AHCI

(Advabced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.

Marvell 9123 Boot ROM [Auto]

This item appears only when you enable the previous item.
[Disabled]

Disables Marvell controller Boot ROM.

[Enabled]

Enables Marvell controller Boot ROM.

Advertising